Author Topic: V-8 motor  (Read 341 times)

Evan Koblentz

  • Registered LUG Members
  • Newbie
  • *
  • Posts: 21
V-8 motor
« on: May 09, 2017, 07:27:30 pm »
Hi,

Not sure if this will impress anyone in an AFOL club but I thought it was cool: I built a little V-8 motor from leftover parts in my stash.

Here's a video of it: https://drive.google.com/file/d/0B5thK4McllfJVDFqaEw5bXJRZk0/view

If I have time, then I'll include it as part of the robot.

Evan Koblentz

  • Registered LUG Members
  • Newbie
  • *
  • Posts: 21
Re: V-8 motor
« Reply #1 on: June 23, 2017, 10:01:56 pm »
Responding to myself. :)

I learned in the past couple of months that, nope, nobody's going to be impressed by a simple "Expert Builder"-era V8.

So I decided to take it up a notch.

I have the complete circa-1987 Dacta TC robotics kit / 9700 Control Center (part of my demo for this weekend at ToyCon). Sometime this summer I will attach the kit's counter wheel and optical sensor to the axle emerging from the rear of the motor. With that I can quasi-scientifically measure the V8 speed in any unit I like -- miles per hour, feet per second, or whatever. I also plan to program a joystick (again, this is using a 1980s eight-bit Apple II computer) to work as a gas pedal. Rather than just being binary on/off, the V8 will acceleration linearly as you move the joystick handle from bottom to top.

Maybe that'll earn me some LUG newbie cred. ;)

Brkian

  • Registered LUG Members
  • Newbie
  • *
  • Posts: 12
Re: V-8 motor
« Reply #2 on: June 29, 2017, 09:00:56 pm »
I like it. Nice job. I'm always drawn to functional builds.